Portable Automatic Ultrasonic Welding Machine High Power Output Various Welding Modes
plastic sonic welder / Plastic Welding Equipment 15khz/20khz 220V
Ultrasonic wave acting on the contact surface of the plastic, it will produce tens of thousands of times per second vibration, this is to achieve a certain amplitude of high-frequency vibration, through the upper and welded parts of the ultrasonic energy transmitted to the welding area, due to the welding area that two welding interface at the interface, so it will produce a high temperature. Also because of poor thermal conductivity, can not be distributed in a timely manner, gathered in the welding area, resulting in the rapid melting of the contact surface of the two plastic, coupled with a certain pressure, so that their integration into one. When the ultrasonic stop action, let the pressure last for a few seconds, so that the solidification of the formation, so that a solid molecular chain, to achieve the purpose of welding, welding strength can be close to the original material strength. Ultrasonic plastic welding depends on the amplitude of the transducer horn, the added pressure and welding time etc. three factors, welding time and welding pressure can be adjusted, the amplitude by the transducer and amplitude. Bar decision. The three interaction with appropriate value, energy exceeds the optimum value, the amount of plastic melting is big, welding material easy to deformation; if the energy is small, it is not easy to be welded, the pressure also should not be too large. The optimal pressure is the best pressure welding part of the side length of 1mm and the edge of each product.
Characteristic:
1. Intelligent Digital Autotune- Provides fully-automatic tuning.
2. Weld by time, energy, peak power, multiple welding mode.
3. Available in 4 frequencies – 15 Khz, 20 Khz 35 KHz and 40 KHz.
4. Increased power levels.
5. Amplitude Stepping for optimization of weld strength and appearance.
6. Built-in digital amplitude control - for fine tuning of critical applications
7. Various welding modes providing maximum flexibility, A range of welding modes enable
optimum ultrasonic processing of plastic parts.
8. Quick application changeover, high welding seam strength.
9. Suitable for high cadences and short cycle times.
10. Systems Protection Monitor (SPM) Five levels of power supply protection are provided:
1) phasing, 2) over voltage, 3) over current, 4) over temperature, 5) power.
Main application: Plastic packaging (includingheat sealing and trimming for upper and lower blister, heat sealing and trimming for blister and cardboard), automobile ornaments, sunshade, trademarks, garments, shoe and cap embossing, leather embossing; gas mattress, boat, life jacket, toy; stationery , raincoat, plastic cover; kinds of medical infusion bag, blood bag, portable soft bag; it can be used for pressing kinds of concave-convex figures and characters. Equipped with some simple devices, it also can be used for bronzing.
it is available for PVC, PET, APET, PU, TPU, PP, Leather and other Plastics.
| Type | Power(W) | Frequency (KHz) |
| ARS-SLHJ-1500W15 | 1500W | 15KHZ |
| ARS-SLHJ-1500W20 | 1500W | 20KHZ |
| ARS-SLHJ-1800W15 | 1800W | 15KHZ |
| ARS-SLHJ-1800W20 | 1800W | 20KHZ |
| ARS-SLHJ-2000W15 | 2000W | 15KHZ |
| ARS-SLHJ-2600W15 | 2600W | 15KHZ |
| ARS-SLHJ-2600W20 | 2600W | 20KHZ |
| ARS-SLHJ-3200W15 | 3200W | 15KHZ |
| ARS-SLHJ-4200W15 | 4200W | 15KHZ |
plastic sonic welder / Plastic Welding Equipment 15khz/20khz 220V
Portable Automatic Ultrasonic Welding Machine High Power Output Various Welding Modes
Product Tags:
|
|
Portable Automatic Ultrasonic Welding Machine High Power Output Various Welding Modes Images
|
